Update:
Upon request I added a version for M10 rods and bolts. Lid stays the same.
Inspired by the Frame Braces (TomExplorador:
...显示更多 https://www.thingiverse.com/thing:2491003) I designed my own frame braces/z axis stabilizers for my Creality CR-10s S5, the 500x500x500 version.
No building space loss on the z axis.
What you need:
- Two M8 threaded rods (750mm long) and 8 bolts
- 12 M3x8 screws and 12 t-nuts
- Reused the 4 screws and t-nuts from the standard z axis holder
- reused the lids as well, otherwise pint out the lids from file
Any suggestions or questions, leave a comment.
Happy Printing
