This is a case designed for the Amazon Fire 7" Tablet. This case was designed around this particular tablet, and probably will not be compatible with any
...显示更多 other tablets. The Fire 7" tablet is a very inexpensive tablet. Normally selling for about $50, you can sometimes pick one up for as low as $30 on sale. As such, it makes for a wonderful in-car entertainment device for your kids. I wanted to create a versatile case for my kids tablets. This case comes in 3 parts for easy printing. (Left, Middle, and Right sections). The middle section is optional, and can be used with only the left and right sections.
Some of the features of the case include:
- Grips on the sides to give a nice comfortable hold when watching moves or playing games in landscape mode.
- Grips also act as a kick stand to allow the tablet to stand up on a flat surface.
- Mounts to back of a car headrest for easy in-car entertainment
- Optional caring handle for to help little ones from dropping
About the mounting brackets for adjustable headrests: These brackets are designed for the 2-post, adjustable headrests. To use the headrest mounts, you simply pull up your headrest and slip on the headrest brackets. Then snap on the swivel clips on the end of each bracket. Then these clips push into the slots on either side of the grips on the tablet case. I've included two types of brackets, a solid one to use if you can completely remove your headrest, and a split one you can snap around the headrest posts if it's not removable.
The brackets are universal, but the swivel clips are specific for Left vs Right.
There's also an optional carrying handle This handle snaps into the same slots as the head rest mounts, and can be easily removed when not needed. I've included the full handle, as well as a split version which should be glued together once printed. The split version is for smaller prints which cannot accommodate the full handle. (The split on as a peg which slides into a slot on it's mate. This peg will probably need support when printing.)
