Been working on this one for a while now. A Formula 1 style steering wheel designed specifically for my Logitech G27 with 70mm adapter. I'll try my best to
...显示更多 outline everything you need to know to print and use this, at least for the G27. If I miss anything just leave a comment to ask.
Wiring doesn't take much, but I've put some details below you help you along.
For assembly you'll need some M3 screws and nuts. I used M3x35, but I think 30mm might work too. The 35s stick out the back a bit.
You'll also need a 70mm adapter if you're using this with a G27, there's a few on here, so just pick one, or get a machined aluminium one from eBay.
The grips are ok as they are, but I have giant lanky hands, so I wrapped them in bicycle handlebar grip tape stuff. There's tons out there, in all sorts of colours, so go nuts.
EDIT: Updated to STL, so the Thingiviews should work now.
