# Additional Materials:
* 4 x 0.25" or 6.3mm Neodymium magnets
* Super Glue
* Craft Foam
# Assembly
1. Print the headband and the horns.
2. Glue 3
...显示更多 magnets into the headband.
3. Glue 2 magnets and the horns to a strip of craft foam to be placed under the wig.
Step 3 is hard to describe but the purpose was to have the horns stick out from under the wig, and the headband will slide over. The magnets on the headband and under the wig will hold the headband in place.
