The MicroCube CXY is a small, inexpensive 3D printer, its the update of the MicroCube using the core xy setup. Most of the parts are reused from the MicroCube, by
...显示更多 this modular approach, it is possible to update an existing printer by only updating the required parts.
This site provides all parts to print the whole printer as well as the firmware pre configured, the steps per unit of the extruder need to be adapted to the used extruder. The output of the heatbed is used to drive the hotend fan. Some of the parts are optional, for example, holder for two different boards are available, RAMPs and MKS board from BigTreeTech.
Original Microcube:
https://www.thingiverse.com/thing:1938877
Features:
------------
+ Still low cost
+ Easy to build
+ Printable Area of 120mm x 110mm x 90mm
+ Small footprint 220mm x 220mm
+ Modular
+ Removable print bed
History
---------
2018/11/17 Version 1.0 Initial Version core xy design
Video
-------
https://youtu.be/_KIqJPmNiKA
For additional information, please refer to the manual of the MicroCube
