Nerf Stryfe Trigger for manual fire ... In my opinion this looks a thousand times better than the stock one Yet still strong enough to work..
Requires the
...显示更多 removal of the Spring cup behind the trigger. I cut mine off with a knife
Also the leaver mechanics has been improved to increase the pusher throw per mm of trigger pull.
PRINT AT 100% INFILL
Any Tips would be greatly appreciated.
Update (02/Aug/2017)
V2 Brought the trigger slightly further forward and some other small changes
V3 Update (04/Aug/2017)
Made the bottom of the trigger run in the inside of the housing (if sticking it may need to be sanded back)
Lengthened upper support arm AND made it deeper to allow it to be supported by the housing.
https://youtu.be/l1Q_kO9Qv0E
https://youtu.be/VaLUBIIwKmg
https://youtu.be/IG-tF6vIC3o
