3D model of prettysmallthings. The models were repaired and checked for printability.
Another grand entrance for our favorite castle playset. 1:18 scale.
The full
...显示更多 staircase requires a 220mm build height. Or, print the file in two sections using the "half files" which are approximately 110mm high each. Print one copy of the platform file.
I've also provided a "mini" file if you're looking for an awesome spiral staircase print for use without a playset - it's 110mm high and makes the best use of your build height.
No support should be required, but a fan probably is. I recommend using one or two extra shells and at least 10% infill.
Attach staircase to castle as indicated in image. No alterations to castle should be necessary.
@KacieHultgren
