3D model of aubenc. The models were repaired and checked for printability.
Just 11 faces and parametric.
Update
kl bttl mk2.stl slices with one error (at least
...显示更多 for me) which adds a layer closing the bottle neck at the top of the inner wall... also, RepG was reporting 20cc! of material needed
Added kl_bttl_mk2 2.stl: radius 30, height 60, walls 1.1mm, 7cc & no slicing error.
The top will need active cooling to print and even like that, it may not print nice :-(
You can go to the "body()" module and set r2 to some little value to help printing the top but THEN... you'll get a huge poly count of 18 faces :-P
The provided stl are supposed to be in the dimensions: 80mm OD, 80mm height and 2mm wall thickness.
