3D model of sebtheis. The models were repaired and checked for printability.
This is my Dual radial fan version based on Tech2C's awesome work
It helps a lot
...显示更多 for people who have trouble with overhang on the opposite side of the blower fan, with tech2c's latest carriage.
Now I can print parts with large overhangs, with standard cura speeds (60mm/s).
Just use 2x 50mm fans (from banggood)
Parts are easy to print without supports
you will need :
2x M3 nuts
2x M3x20 (min) screws
2x M4x30 screws
Tech2c's E3D v6 Bowden X-carriage
Cheers!
https://www.facebook.com/themakerscult
