3D model of intentional3d
The models were repaired and checked for printability.
Removing the shell from our "Spool Snail" model instantly turns it into
...显示更多 a slug. We printed ours with Ninjaflex filament to make it squishy!
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
10%
Notes:
We printed our slug in Ninjaflex which required some tweaking of the print settings in Makerbot desktop to get it to print correctly. We set the fan power to 100% and lowered the print speed to 30 mm/s for everything except for bridges which we set to 40 mm/s.We also set the Retraction distance to 0.5 mm and the Retraction speed to 15 mm/s.
http://twitter.com/intentional3D
