由Sonja_3dstl创建的PrintBot Renacuajo

模型来自
loading...
模型描述
3D model of bqeducacion
The models were repaired and checked for printability.

This is an educational robot intended to be used as a sniffer or line follower.
It...显示更多 has been designed to attach other components such as servos, LEDs, push buttons, a buzzer, and other sensors included in the product "Zum Box" distributed by BQ.

BOM (see attached image)
Printed parts:

1 x chassis
1 x battery holder
2 x wheel
1 x sniffer
Hardware:

15 x M3x10 screw
2 x M3x40 screw
16 x M3 nut
2 x 3x50mm O-ring
8 x AAA batteries
Parts included in "Zum Box" by BQ:

1 x Battery holder
1 x BQ Zum Core
2 x IR sensor
1 x Button
2 x Light sensor
1 x Buzzer
1 x Ultrasound sensor
1 x Potentiometer
2 x Led
1 x Micro-USB Cable
2 x Miniservo
2 x Continuous rotation servos

Example code
Attached you will find a simple Arduino program for following a line ("Arduino_renacuajo_line_follow.ino").

Android-Control
Now you can control your robot through the "RoboPad" app.
So just upload the "Arduino_robopad_renacuajo.ino" into your robot, connect the Bluetooth Module and install the Android app.
https://www.instagram.com/bq.educacion
关于模型设计师
64 models uploaded
简介已审核