3D model of bqeducacion
The models were repaired and checked for printability.
Create your own articulated frightening mask. You just have to print two parts and
...显示更多 fit the axis of the jaw. Then, add a thin elastic cord to open and close the jaw.
Resolution:
Layer height(mm): 0.2
Infill:
10%
Notes:
Printed pla 210º (c)
No need to add supports. Only the top of the mask advise add to improve adherence: Brim or raft.
The lower piece of the mask has a small support that you must remove before join the two parts
1- Remove support material
2-3 Turn the jaw and introduce the joint into the slot. 2-join 3-slot
4-Add a thin elastic cord (1mm -1.5mm diameter)
5-To attach the mask to the head, intruduce by an elastic cord holes
https://www.instagram.com/bq.educacion
