3D model of tigermcho
The models were repaired and checked for printability.
I designed a lightweight indoor boomerang.
This is a snowflake version designed using
...显示更多 BlocksCAD®.
Dimensions : 120 x 106 x 0.6 mm
Radius of the flight : 1~2 meters
Weight : about 2.0 grams
Printer:
Printrbot Simple Metal
Rafts:
No
Supports:
No
Resolution:
0.2mm layer thickness
Infill:
100%
Notes:
To reduce the weight, use 80~90% of the flow compensation rate(the amount of material extruded is multiplied by this value.).
1) Along the grooves, bend the leading and trailing edges at 15~20 degrees.
2) Bend blades(wings) down a little bit, but not fly too high.
Use a layover angle(throwing angle) of about 30 degrees or less.
Do not throw sidearm.
https://www.youtube.com/channel/UCMQtV6XT0Jq2dCZFDgwOUCw/featured
