3D model of vandragon_de
The models were repaired and checked for printability.
A small simple ocean giant for the bathtub
But it's also great fun to play on
...显示更多 dry land.
The first 30 layers should be printed with 50% infill, the rest with 15%. It should just get easier upwards. On the ground, you just have to put a little more weight on the ground
stabilization must be present.
Material:
RED - Fillamentum (0.15) Prusa MK2s
BLUE - Janbex (0.2) Wanhao i3 V1
Although it is a lot of fun to draw boats and bring them to life, it takes a lot of time to research and draw. Especially the 1:1000 scale models are very time-consuming.
Printer brand:
Prusa
Printer:
i3 MK2S
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
50% and 15%
Notes:
The first 30 layers should be printed with 50% infill, the rest with 15%. It should just get easier upwards. On the ground, you just have to put a little more weight on the ground rnstabilization must be present.rn
https://www.instagram.com/vandragon_de
