3D model of landon73-leesedrenfort
The models were repaired and checked for printability.
Great for adding terrain quickly without using many resources, and
...显示更多 perfect for setting up tourney tables on a budget. The car in this kit can be printed in an hour and a half with only 19 grams of filament.
This model is to be printed in vase mode / spiralize contour mode with the orientation as the models are provided.
This model has been test printed with a 1.0 mm nozzle and a layer height of 0.12 mm or less.
Make sure to check your printing preview in cura after slicing, sometimes cura skips a layer or two when slicing in vase mode. If this happens just rotate the model a few degrees around the z-axis and slice again until its fine.
cura profile for an ender3 is also included in the download.
This models should print without supports flat on the build-plate with an FDM printer with a 1.0 nozzle in spiralize mode.
Models are scaled for 40mm gaming or also known as O gauge / 1:48 scale. They have been scaled to my preferences and re-scaling may be required to fit your particular needs.
Private Use Only Non Commercial No Derivatives NOTE: Do not under any circumstances share these files for free or commercially!
Printer brand:
Creality
Printer:
Ender 3
Infill:
0
Notes:
Spiralize function
https://instagram.com/instagramleesedrenfort
