由3dmodels_by_创建的Mostly Printed CNC "MPCNC" BURLY C-23.5mm OD

模型来自
loading...
模型描述
3D model of allted
The models were repaired and checked for printability.

Mostly Printed CNC / Multi-Tool
These parts are for 23.5mm OD conduit.

The...显示更多 "MPCNC" a minimal cost CNC machine that is easily sourced worldwide and can easily swap out its functionality.

The only special tools needed are a hacksaw, and a drill to for 4 holes.

This can be easily expanded to almost any length, width, and depth depending on rigidity required. Shorter lengths = more rigid. This is built using hardware store emt conduit (In the US it is sold as 3/4" (ID)), or as an upgrade you can use stainless steel tubing.

Most woods and plastics should be no problem. I milled Aluminum with a footprint of 23.5in x 32in x 4in. Aluminum works well. Yes, even some Steel.

You can switch the spindle out with a drag knife, laser, Extruder, ect, making it a great prototyping multi-tool. By adding length and depth It could easily be used to shape large easily milled things like wood, foam, or plastics. Keep it small for metals.

Printer:
MP3DP

Rafts:
Doesn't Matter

Supports:
No

Filament brand:
Doesn't matter

Filament material:
PLA

I am using marlin, there are a lot of options if you don't like this, grbl, tiny g, ect.

The X and Y steppers are wired in Series or Individually.

Fusion 360 for the intermediate users with some experience.

Many others work as well.
http://twitter.com/V1Engineering
关于模型设计师
11 models uploaded
简介已审核