Professional CoreXY Voron 2.4 with a heated, enclosed chamber. Tuned for accurate ABS/ASA and high-quality PLA/PETG. Filament is dried before printing; dimensional
...显示更多 QC available on request.
What this machine is best at:
Functional ABS/ASA parts, fixtures, enclosures, brackets
Tight tolerances on small components
Clean PETG/PLA for visual parts with consistent finish
Nozzles: 0.25 / 0.40 (standard) / 0.60 / 0.80 mm
Layer heights: 0.12–0.32 mm
Typical tolerances: ±0.20 mm under 100 mm; ±0.30 mm on larger spans
Quality and process
Enclosed, heated chamber to control warp on ABS/ASA
Filament dried and stored; parts de-stringed and lightly deburred
Spot-check with calipers for customer-provided critical dimensions
Before you order
Provide STL or 3MF in millimeters
Note critical dimensions and desired fit (press, slip, clearance)
Default strength: 3-4 perimeters
Guarantee:
Free reprint for manufacturing defects (design/file changes are quoted if a re-run is requested)
