关于BiZon Prusa i3 Steel
BiZon Prusa i3 Steel is the Prusa i3 Steel version with an enlarged 300x300x340 mm print area. A set for self-assembly. From its predecessors from the Prusa family, this 3D printer features a HARD STEEL HULL with reinforced ribs, an expanded print area, the ability to print various materials - ABS, PLA, HIPS, FLEX, PVA.
ВiZon P3Steel with dimensions 510х560х580 mm has a large construction area - 300х300х340 mm, which makes it the best option for personal use and small-scale production. The body design does not use studs or plastic parts - everything is made of steel. For greater rigidity, the construction uses 10mm shafts. This model provides reliability, quality and high speed printing.
SPECIFICATIONS
Dimensions:
- Dimensions of the printer: 510х560х580 mm (with coil 510х560х740 mm)
- Weight: 15.5 kg
Printing options:
- Printing technology: FDM (Fused Deposition Modeling)
- Printing area: 300x300x340 mm
- Layer height: minimum 50 microns (with nozzle 0.2-0.3 mm), optimal 150-200 microns, maximum 0.6 mm (with nozzle 0.8 mm)
- Print speed: recommended 30 mm / s, maximum recommended 100 mm / s
- Material used: ABS, PLA, HIPS, FLEX, RUBBER (Thread diameter 1.75 mm)
- Heated platform: maximum temperature 120 0С
Electronics:
- MKS Gen V1.4
- LCD display with SD card reader and control button
- Power supply 400 W, 12 V
- Heating table 328x328 mm
Software:
- firmware: Marlin
- Software: Repetier-Host, Slic3r, Cura
- Compatible with OS: Windows, Mac OS, Linux
Extruder parameters:
- Diameter of the nozzle: 0.4 mm (0.2-0.8 mm)
- Thread diameter: 1.75 mm
- Number of heads: 1
EQUIPMENT
Electronics:
- MKS Gen V1.4 (1 piece)
- LCD display (1pcs)
- USB cable (1 piece)
- driver stepper motor A4988 (5 pcs)
- stepper motor Nema 17 (4 pcs)
- extruder assembly (1 piece)
- mechanical limit switch (3 pcs)
- power supply 12 V (1 pc)
- heating table (1 piece)
- NTC thermistor 100 kΩ 3950 for heating table (1 pc)
- fan (blowing Hot-End 30x30, blowing out boards 40x40) (2 pcs)
- wires "papa-mama" for elongation-connection of engines, thermistors, limiters with RAMPS 1.4 (20 pcs)
- power cable 220V (1 piece)
- power connector with a button (1 pc)
Mechanics:
- set of body parts (steel 3mm, painted black)
- set of polished shafts with a diameter of 10 mm
- transfer screw-nut M5 (movement along the Z-axis) (2 pcs)
- set of nuts, screws, washers, springs
- connection sleeve 5x5 mm (2 pcs)
- linear bearing lm10uu (11 pcs)
- bearing 608ZZ (2 pieces)
- bearing 625ZZ (2 pieces)
- Toothed belt GT-2 (2 pcs)
- toothed pulley GT-2 (2 pcs)
- braid for wires (2 pcs)
- mirror for the heating table (1 pc)
- clamps for mirrors (6 pcs)
