da Vinci 1.0 PRO

所有者反馈

VTOA 3D prints

2019年7月30日

I am very satisfied with the printing results. And once it is printing it completes the job well.
Although presented as a plug and play solution, it requires mechanical repairs by the operator. A bit more than should be expected. The electronics are well engineered. The enclosure works well for temperature stability (printing ABS works fine).
The slicing software included with this printer is not good enough to get the best quality out of this printer. At this moment I use Simplify3D or Slic3rPE instead. After more than 4000 hours of running this printer I find it good value for money.

文件

• User Manual_PRO_ENG.pdf

关于da Vinci 1.0 PRO

Print Specification:

Technology

FFF (Fused Filament Fabrication)

Maximum Build Volume(WxDxH)

7.8 x 7.8 x 7.8 inch

Resolution

Fine 0.1 mm (100 microns)

Standard 0.2 mm (200 microns)

Speed 0.3 mm (300 microns)

Ultra Fast 0.4 mm (400 microns)

Print Head

Single Nozzle

Nozzle Diameter

0.4 mm

Filament Diameter

1.75 mm

Filament Material

ABS/PLA

Display

Panel Type

2.6” FSTN LCM

Language

Multi Language

Connectivity

USB 2.0 / Wifi

Printing Temperature Range

Printed Extruder

170°C ~ 240°C (338°F ~ 464°F)

Printed Bed

41°C ~ 90°C (105°F ~ 194°F)

Software

Software

XYZware Pro

File Types

.stl , XYZ Format (.3w), G-code

Operating System

Win 7 and above / Mac OSX 10.8 and abo